Enclosure Systems
Compact Series
Compact Enclosures
- This set of enclosures are compact in design with maximum utilization of space.
- Manufactured out of electrogalvanized steel sheet, the welded mono block body with folding at the front gives good rigidity.
- Electrogalvanized steel sheet combined with oxsilan® treatment and electrostatic powder coating with polyester powder (RAL 7032-texture) gives excellent resistance to corrosion in the hot, humid & salt laden atmosphere.
- 120 degree openable, concealed hinges are easily removable for performing cutout operations on door.
- Neoprene gasketed gland plates (top gland plate-optional) can be fixed inside or out side the enclosure.
- Standard double bit key operated locks can be substituted with optional wing knob type (lockable & non lockable) locks.
- Wall mounting provision for direct fixing or with optional wall mounting brackets.
- Easy fixing of mounting plates with studs for optimum use of space.
- Welded earth studs for door/body earthing.
- Degree of protection IP 55 & 65.
HINGES & MOUNTING PLATE
EARTHING BETWEEN BODY & DOOR
WALL MOUNTING BRACKET
STANDARD LOCK
Medium Series
Medium Enclosures
- Manufactured out of electrogalvanized steel sheet, the welded monoblock body with folding at the front gives good rigidity.
- Electrogalvanized steel sheet combined with oxsilan® treatment and electrostatic powder coating with polyester powder (RAL 7032-texture) gives excellent resistance to corrosion in the hot, humid & salt laden atmosphere.
- 120 degree openable, concealed hinges are easily removable for performing cutout operations on door.
- Standard double bit key operated three point locks can be substituted with optional wing knob type (Lockable or Non-Lockable) locks.
- Glanding space of 25mm at the bottom avoids additional plinth in most cases.
- Neoprene gasketed gland plate at the bottom with ample cabling space.
- Additional canopy can be supplied as an option for outdoor installation.
- Welded earth studs for door/body earthing.
- Degree of protection IP55.
OPTIONAL CANOPY
HINGES & MOUNTING PLATE
EARTHING BETWEEN BODY & DOOR
STANDARD LOCK
Ordering References (all dimensions are in MM)
Large Series
Large Enclosures
- Welded construction with removable rear covers.
- Electrogalvanized steel sheet combined with oxsilan® treatment and electrostatic powder coating with polyester powder (RAL 7032-texture) gives excellent resistance to corrosion in the hot, humid & salt laden atmosphere.
- 120 degree openable, concealed hinges are easily removable for performing cutout operations on door.
- Glanding space of 25mm at the bottom avoids additional plinth.
- Swing handle type 3 point lock for better ergonomy. Locking provision available as optional.
- Neoprene gasketed gland plate at the bottom with ample cabling space.
- Additional canopy can be supplied as an option for outdoor installation.
- Welded earth studs for door/body earthing.
- Degree of protection IP55.
Ordering References (all dimensions are in MM)
STANDARD LOCK
GLAND PLATE & MOUNTING PLATE
EARTHING BETWEEN BODY & DOOR
Extendable Series
Extendable Series
- These enclosures are available in four convenient widths.
- Enclosures are extendable which make them suitable for long single switchboard with removable rear and side panels.
- Electrogalvanized steel sheet combined with oxsilan® treatment and electrostatic powder coating with polyester powder (RAL 7032-texture) gives excellent resistance to corrosion in the hot, humid & salt laden atmosphere.
- 180 degree openable, concealed hinges and lockable swing handle with flat rod locking system improves the aesthetics and ensures IP rating.
- Glanding space of 25mm at the bottom avoids additional plinth.
- Neoprene gasketed gland plate at the bottom with ample cabling space.
- Perforated vertical corner members allow fixing of additional depth members, multiple mounting plates at different levels or fully adjustable common mounting plate.
- Eye bolts for ease of handling.
- Welded earth studs for door/body earthing.
- Degree of protection IP55.
Ordering References (all dimensions are in MM)
* Consult us for Form 4 Enclosure with 250mm Width Vertical Busbar Chamber, 400mm Width Cable Chamber & Height 2300 mm
EARTHING BETWEEN BODY & DOOR
GLAND PLATE & MOUNTING PLATE
HINGES
LOCK
Distribution Board
Row DB
- DIN type Distribution boards are available in surface and flush mountable versions from 1 Row up to 8 Rows.
- DIN Rail chassis is mounted on studs with level adjustable fly nuts and are designed to accept snap on type neutral and earth bars. Each row can take 16 modules of equipment (optional – 24 modules) and the spacing between rows is 150mm.
- End plates have one multiple diameter knockout for accepting three different sizes of incomer cable and many knockouts outgoing cables.
- Liberally designed size provides ample cabling space.
- The door or the box itself is reversible for left or right opening.
- The consumer boards are made of electrogalvanized steel sheets, electrostatically powder coated in RAL 7035.
- Degree of protection IP41 & 43
Ordering References (all dimensions are in MM)
Straight Busbar & Split Type Final Distribution Board
Ordering References (all dimensions are in MM)
INSIDE VIEW
Aluminium Enclosures
Aluminum Enclosure Double Wall
- Technical Data Materials:
- Sheet steel electrogalvanized, Aluminum or Stainless Steel as requested
- Thickness:
- Enclosure: 3.0 mm
- Door: 3.0 mm
- Mounting Plate: 2.0 mm
- Surface Treatment:
- Degreasing
- Zinc Phosphating
- Powder Coating (90-120 Microns) Oven cured.
- Colour Finish:
- Enclosure body RAL 7035
- Mounting Plate RAL 7035
- Options all RAL colors can be provided on request
- Protection Class:
- IP 30/44/54/55/65
- Drawing & design can be modified or redesign as per customer requirement.